Single LED can dimmer

SKU: 1360622

Single LED can dimmer

EUR56.19

Available in central stock
Quick facts

Additional information

Weight 0.05 kg
Diameter

48mm
Dimmable

0-100%
Effect

0-200VA
IP-class

20
volts

230VAC
Miscellaneous

Memory function

Dimmer LED LDN200 from Vadsbo. Together with a spring-loaded push button, the dimmer creates a dimmer function.

The product does not require a zero when inserted and is therefore ideal for installation where the zero is missing in the appliance box or is difficult to access. The dimmer is mounted behind the switch or in the ceiling cup.

The dimmer is used for LED 0-200VA, 230V halogen and electronic transformers. The dimmer has a memory function and retains the last set light level when turning on and off. The product has an adjustable boost function and minimum and maximum dimming levels.

The dimming is controlled by one or more resilient pushbuttons. See for example: 31-330-17-2, 31-330-27-2, 3041-46-91

Designation: LDN200
Lighting control: controlled via one or more rocker switches
Soft start: Yes
Memorizes last set brightness: Yes, even after power failure
Overheating protection: Yes, automatic reset after fault removal
Short circuit protection: Yes, automatic reset after fault removal

Description

Dimmer LED LDN200 from Vadsbo. Together with a spring-loaded push button, the dimmer creates a dimmer function.

The product does not require a zero when inserted and is therefore ideal for installation where the zero is missing in the appliance box or is difficult to access. The dimmer is mounted behind the switch or in the ceiling cup.

The dimmer is used for LED 0-200VA, 230V halogen and electronic transformers. The dimmer has a memory function and retains the last set light level when turning on and off. The product has an adjustable boost function and minimum and maximum dimming levels.

The dimming is controlled by one or more resilient pushbuttons. See for example: 31-330-17-2, 31-330-27-2, 3041-46-91

Additional information

Weight 0.05 kg
Diameter

48mm
Dimmable

0-100%
Effect

0-200VA
IP-class

20
volts

230VAC
Miscellaneous

Memory function

Reviews

There are no reviews yet.

Be the first to review “Single LED can dimmer”

Your email address will not be published. Required fields are marked *


The reCAPTCHA verification period has expired. Please reload the page.

You may also need to

Dimmer LED insert bakelite

EUR98.89

Add to cart

Dimmer insert for LED 4-100W white porcelain

EUR123.16

Add to cart

Dimmer insert for LED 4-100W black porcelain

EUR137.55

Add to cart

Related products

Frame round natural

Round frame in untreated beech that fits Fontini’s recessed switches and sockets.

The frame can be painted in any color.

EUR17.08

Staircase switch white porcelain classic knob

Classic surface-mounted switch in white porcelain with white porcelain knob in a design that was common in Europe during the first half of the 20th century.

This switch has a so-called staircase function, which means that it can be used as a regular switch to turn a light source on and off. It can also be used in rooms, corridors or staircases to turn on a light source at one end of the room and off at the other end. If staircase switching is required, two switches with staircase function are needed. If a light source is also to be controlled from a third switch, this must have a cross function.

In the side of the base there is an opening for cable exit for surface-mounted electrical wiring, but it can also be mounted for recessed wall box in combination with any of Fontini’s base plates.

For surface mounting on wood paneling or other flammable material, an insulating plastic base plate can be used as additional fire protection.

EUR44.50

Stair switch white porcelain dark stain knob

Classic surface mounted switch in white porcelain with dark stained wooden knob in a design that was common in Europe during the first half of the 20th century.

This switch has a so-called staircase function, which means that it can be used as a regular switch to turn a light source on and off. It can also be used in rooms, corridors or staircases to switch on a light source at one end of the room and off at the other end. If staircase switching is required, two switches with staircase function are needed. If a light source is also to be controlled from a third switch, this must have a cross function.

In the side of the base there is an opening for cable exit for surface-mounted electrical wiring, but it can also be mounted for recessed wall box in combination with any of Fontini’s base plates.

For surface mounting on wood paneling or other flammable material, an insulating plastic base plate can be used as additional fire protection.

EUR44.50

Frame 3-compartment white porcelain

Three-compartment frame in white porcelain suitable for Fontini recessed switches and sockets.

ATTENTION! Three switches or sockets combined with this frame require three separate wall boxes.

EUR55.29

Plejd Can dimmer 300VA

Universal dimmer with two separate inputs for control via a spring-loaded push button or motion sensor. The product can be controlled automatically through built-in time functions such as astro and week clock, as well as wirelessly via the app or through other Plejd products. DIM-01 has adjustable minimum, maximum and start levels and can handle loads of up to 300 VA.

EUR58.88

Double Turn Dimmer white porcelain brass knob white frame

Recessed double dimmer in white porcelain with brass knobs in a design that was common in Europe during the first half of the 20th century.

The double dimmer swivels in two directions and has a so-called crown function, which means that it is used to dim two separate light sources.

The supplied dimmer switch is placed in appliance boxes in the wall.

EUR161.82

Related articles

There are no related articles for this product.

Please leave a comment what you think about our new webshop