Cabinet rule 5181U
Cabinet rule 5181U - Image 2

SKU: 5181050001

Cabinet rule 5181U

EUR8.52

Available in central stock
Quick facts

Additional information

Weight 0.1 kg
Material

Stainless steel
Surface treatment

Polished stainless steel

Model: Albert Karlsson Metallfabriksbolag “Ticka Standard”

Period: 1930-1960

Without striker plate. Used as a handle on cabinet doors with other closing mechanisms, such as magnetic locks or self-closing hinges. The cabinet handle does not have a latch and therefore does not require drilling in the door.

For placement, see article number 5181.

When installing cabinet frames on lacquered cabinet doors, the screws should not be overtightened to avoid cracking the lacquer.

Use screwdrivers, not screwdrivers.

Screw not included.

Matching screw number 19

Description

Model: Albert Karlsson Metallfabriksbolag “Ticka Standard”

Period: 1930-1960

Without striker plate. Used as a handle on cabinet doors with other closing mechanisms, such as magnetic locks or self-closing hinges. The cabinet handle does not have a latch and therefore does not require drilling in the door.

For placement, see article number 5181.

When installing cabinet frames on lacquered cabinet doors, the screws should not be overtightened to avoid cracking the lacquer.

Use screwdrivers, not screwdrivers.

Screw not included.

Matching screw number 19

Additional information

Weight 0.1 kg
Material

Stainless steel
Surface treatment

Polished stainless steel

Reviews

There are no reviews yet.

Be the first to review “Cabinet rule 5181U”

Your email address will not be published. Required fields are marked *


The reCAPTCHA verification period has expired. Please reload the page.

You may also need to

Screw 19 galvanized TFS 3.5×19 mm per piece

EUR0.36

Add to cart

Screw 19 zinc plated TFS 3,5×19 mm 10 pack

EUR3.14

Add to cart

Related products

Cabinet rule 5181

Model: Albert Karlsson Metallfabriksbolag “Ticka Standard”

Period: 1930-1960

An end cap is included.

This model is intended for overlapping doors.

It is placed vertically at the top edge of the door on lower cabinets (as shown), vertically but upside down compared to the picture at the bottom edge of upper cabinets, and horizontally on the side of the door on upper cabinets.

When installing cabinet frames on lacquered cabinet doors, the screws should not be overtightened to avoid cracking the lacquer.

Use a screwdriver instead of a screwdriver.

Screw not included.

Matching screw number 9 for the bolt and screw number 19 for the end plate

EUR11.21

Sponge brush

Fresh mushrooms lose flavor when rinsed in water – dirt and soil should therefore be brushed or cut away. This handy oiled birch and horsehair mushroom brush effectively removes dirt and debris without damaging the mushrooms.

The brush also works great as a bread brush when baking with molds with small and detailed patterns as the round shape makes it small and flexible.

EUR13.37

Kitchen shelf loose bracket

Console for our kitchen shelf in simple Art Nouveau style after the model from around 1905. Originally made as a counter shelf with shelves of rib, where you put pots etc for drainage.

EUR42.61

Brick shelf

Tray shelf of the turn of the century type after Gysinge’s own model. For storage of serving trays, larger dishes, plates, etc. with a depth of up to 4.5 cm.

Untreated pine. Hand carved.

Tips! In the kitchen in Gysinge, Gästrikland, we also use it as a magazine rack.

EUR134.10

Kitchen stove rod nickel-plated 105 cm complete

Rod to attach above the kitchen stove for kitchen utensils, potholders etc. Can also be used as a towel rack in the kitchen, or in the bathroom.

MATERIAL Made of solid nickel-plated brass. Polished shiny surface, but not lacquered. The model was common from the late 1800s until the 1930s. Highest quality.

MOUNTING The wall brackets have sturdy iron screws (3.5 mm) that are screwed (carefully!) into the wall. The hooks and brackets are then screwed onto the pole. Last of all, you tighten the screws that prevent the bar from rolling.

TIP The bar can be shortened by sawing it off. It can also be connected to another pole if you want a longer version. In that case, you should place another wall bracket over the joint and buy an extra coupling bracket.

EUR374.50

Plate shelf

Shelf for placing dishes and plates after a model from the 18th century from Ovansjö parish in Gästrikland. Four shelves, three of which are intended for plates. The original shelf is painted in English red with green front edges on shelves and support strips. Well made carpentry work. Unpainted.

EUR421.14

Related articles

There are no related articles for this product.

Please leave a comment what you think about our new webshop