Knob for Fontini switch.
Antique treated brass.
EUR20.57
Round base plate in untreated beech. Mainly intended for mounting Fontini surface-mounted switches and sockets in recessed wall boxes.
The bottom plate can be painted in any color.
EUR16.91
Base plate with two compartments in untreated beech. Intended for mounting Fontini surface-mounted switches and sockets in recessed boxes.
ATTENTION! When installing in a recessed wall box where the base plate is combined with two sockets or switches, two separate wall boxes are required.
EUR25.14
Base plate with three compartments in untreated beech. Intended for mounting Fontini surface-mounted switches and sockets in recessed boxes.
ATTENTION! When installing in a recessed wall box where the base plate is combined with three sockets or switches, three separate wall boxes are required.
EUR36.10
Base plate for our white surface-mounted switches and wall outlets where they are mounted on combustible material, such as paper wallpaper or wood.
EUR7.31
Classic surface-mounted electrical outlet in black porcelain with plastic insert in a design that was common in Europe during the first half of the 20th century.
In the side of the bottom there is an opening for cable outlet for surface-mounted electrical wiring, but the outlet can also be mounted for recessed wall outlet in combination with one of Fontini’s base plates.
When surface-mounted on wood paneling or other flammable material, an insulating plastic base plate should be used as extra fire protection.
The outlet is grounded and has a pin protection.
EUR35.19
Base plate for our black surface-mounted switches and wall outlets where they are mounted on combustible material, such as paper wallpaper or wood.
Bakelite.
Round base plate in dark stained beech. Mainly intended for mounting Fontini surface-mounted switches and sockets in recessed wall boxes.
EUR22.39
Base plate with two compartments in dark stained beech. Intended for mounting Fontini surface-mounted switches and sockets in recessed boxes.
Base plate with three compartments in dark stained beech. Intended for mounting Fontini surface-mounted switches and sockets in recessed boxes.
EUR49.36
Brass knob in classic design that fits Fontini recessed and surface mounted switches.
Wrath is sold individually.
Black porcelain knob in classic design that fits Fontini’s recessed and surface-mounted switches.
The knobs are sold individually.
EUR10.51
White porcelain knob in a classic design that fits Fontini’s recessed and surface-mounted switches.
EUR8.68
Classic surface-mounted switch in black porcelain without a knob in a design that was common in Europe during the first half of the 20th century.
This switch has a so-called cross function, which means that it should only be used if more than two switches are to control the same light source from different locations in a room, staircase or corridor. The cross-function switch is then mounted between two staircase switches.
If an ordinary switch is required to turn a light source on and off, or if two switches are connected to the same light source, a step switch should be selected instead.
In the side of the base there is an opening for cable exit for surface-mounted electrical wiring, but it can also be mounted for recessed wall box in combination with any of Fontini’s base plates.
For surface mounting on wood paneling or other flammable material, an insulating plastic base plate should be used as additional fire protection.
Combine the switch with the optional knob sold separately. See related products below.
EUR54.38
Classic surface-mounted switch in white porcelain without a knob in a design that was common in Europe during the first half of the 20th century.
In the side of the base there is an opening for cable exit for surface-mounted electrical wiring, but it can also be mounted for recessed wall outlet in combination with one of Fontini’s base plates.
For surface mounting on wooden panels or other flammable material, an insulating plastic base plate can be used as additional fire protection.
EUR52.56
Chronic dimmer LD200KRON from Vadsbo. Together with a resilient push button, the dimmer creates a dimmer function.
Crown dimmer means two dimmers in the same enclosure. The product is designed to be installed in A or B boxes. Installed in an appliance or in a junction box, for example behind the switch or in the ceiling cup.
LD200KRON is specially adapted for dimming low energy and LED lamps. The dimmer is equipped with two control inputs and you can thus mix different loads on the outputs. The product can handle a load of up to 100VA per channel and has an adjustable minimum dimming level.
For example, the dimmer can be controlled by a resilient switch. See for example: 31-330-17-2, 31-330-27-2, 3041-46-91
EUR71.29
Surface-mounted rebounding double dimmer in black porcelain with knob in a design that was common in Europe during the first half of the 20th century.
The double dimmer has a so-called crown function, which means that it is used to dim two separate light sources. The supplied dimmer switch is placed in appliance boxes in the wall.
EUR136.64
Surface-mounted spring-loaded double dimmer in black porcelain with brass knob, a design that was common in Europe during the first half of the 20th century.
EUR147.15
Surface-mounted rebounding double dimmer in black porcelain with classic knob in porcelain, a design that was common in Europe during the first half of the 20th century.
Surface-mounted rebounding double dimmer in black porcelain with dark stained wooden knob in a design that was common in Europe in the first half of the 20th century.
EUR135.27
Surface-mounted resilient double dimmer in black porcelain with natural-colored knob, a design that was common in Europe during the first half of the 20th century.
Surface-mounted rebounding double dimmer in black porcelain without knob in a design that was common in Europe in the first half of the 20th century.
The double dimmer has a so-called crown function, which means that it is used to dim two separate light sources. The dimmer switch, sold separately, is placed in appliance boxes in the wall.
For surface mounting on wood paneling or other flammable material, an insulating plastic base plate can be used as additional fire protection.
Please note! Knobs and dimmers are sold separately.
EUR56.67
Surface-mounted rebounding double dimmer in white porcelain with white classic porcelain knob in a design that was common in Europe in the first half of the 20th century.
The double dimmer has a so-called crown function, which means that it is used to dim two separate light sources. The supplied dimmer is placed in the wall socket.
EUR128.87
Surface-mounted resilient double dimmer in white porcelain without knob in a design that was common in Europe in the first half of the 20th century.
ATTENTION! Screw included. Knob and dimmer not included.
EUR50.27
