Store

Great for repairing glaze damage on tiled stoves etc.

Pond varnish is traditionally used on tiled stoves instead of linseed oil paint. This is because pond varnish does not turn yellow when the stove gets hot.

Prepare the duster solution in the same way as when making linseed oil paint. Stir the color pigments with the dust solution to form a porridge. Then dilute with additional solution to the appropriate consistency. If the kiln is really old and dull, you can dilute the colored duster solution with turpentine, so that it becomes less shiny. If the damage to the glaze consists only of small scratches or occasional chips, it is usually sufficient to paint over them with a dusting solution as above, and omit the plasterwork altogether. With the right color in the wounds, they will disappear to the eye anyway. Repeat the treatment if the paint did not cover enough the first time.

Tips! V years of experience is that Gysinge linseed oil paint does not yellow like others. Therefore, as an alternative to a dust solution, try painting the damage with Gysinge paint instead.

Chains of the so-called patent model to be used for draft dampers on tiled stoves, spiral valves, etc. Thin, flexible and supple, yet strong and durable.

Can be mounted in two ways; Firstly, as a single length hanging arch. This method is suitable for spiral valves, for example. Partly hanging in two lengths with damper tassels as termination. This was common on the draught dampers of tiled stoves.

Normally, 150-200 cm of chain is needed depending on how high the stove is and how far down you want the chain to hang. The easiest way to shorten or cut the chain is with wire cutters.

Brass. Sold per meter. Width 3 mm.

Chains of the so-called patent model to be used for draft dampers on tiled stoves, spiral valves, etc. Thin, flexible and supple, yet strong and durable.

Can be mounted in two ways; Firstly, as a hanging arc in a single length. This method is suitable for spiral valves, for example. Partly hanging in two lengths with damper tassels as termination. This was common on the draught dampers of tiled stoves.

Normally, 150-200 cm of chain is needed depending on how high the stove is and how far down you want the chain to hang. The easiest way to shorten or cut the chain is with wire cutters.

Nickel-plated brass. Width 3 mm, price per meter.

Tassels from the 1910s. Tassels from the turn of the 20th century are usually only turned, unlike those from the 19th century, which really resembled real tassels.

We have produced an Art Nouveau model with fine turning and care in the details. The model for this damper is from Tyskbo Bergsmanssmedja in By parish Horndal.

Untreated brass. Height 60mm.