SKU: 3071-161
EUR498.76
CE: In compliance with EN 60335-1, EN 60335-2-45 standards.
Connection: 1 phase standard earthed socket.
Cable: 3 x 1.5 kvmm rubber cable, 2.5 m length.
Volt: 220 – 240
Watt: 1100
Amp: 4.8
Weight: approx. 1900g.
Size: L= 370 mm, W= 170 mm, H= 160 mm.
Overheating protection. Protects the appliance components from overheating.
Heating element: 2 x 550 Watt IR tubes.
Heating surface size: 310 x 125 mm.
Angle brackets are included.
Instructions for use/safety regulations S/N/DK/SF/GB/D/NL/F/E.
| Weight | 3.75 kg |
|---|
Speedheater is a device for removing paint indoors and outdoors, on wood, windows, carpentry, etc.
Unlike heat guns, the Speedheater uses infrared heat, which silently melts the paint down to the surface of the wood at 100-200 degrees, instead of burning it away. By not blowing hot air into cracks and holes, it is also superior to hot air guns in terms of fire protection.
Speedheater removes both paint and putty at the same time and is therefore also useful for window renovation. Low working temperature, does not burn the substrate, does not release any lead gases and minimizes the risk of fire.
With a Speedheater, even an amateur works quickly and efficiently. Normally, between 15 and 25 square meters of facade are removed per working day.
The facts
Supplied with angle support and two scrapers.
Profile scraper. For profiled facades and rough carpentry.
Mountain panel scraper. For smooth surfaces and facades of the mountain panel type.
Speedheater is a device for removing paint indoors and outdoors, on wood, windows, carpentry, etc.
Unlike heat guns, the Speedheater uses infrared heat, which silently melts the paint down to the surface of the wood at 100-200 degrees, instead of burning it away. By not blowing hot air into cracks and holes, it is also superior to hot air guns in terms of fire protection.
Speedheater removes both paint and putty at the same time and is therefore also useful for window renovation. Low working temperature, does not burn the substrate, does not release any lead gases and minimizes the risk of fire.
With a Speedheater, even an amateur works quickly and efficiently. Normally, between 15 and 25 square meters of facade are removed per working day.
The facts
Supplied with angle support and two scrapers.
Profile scraper. For profiled facades and rough carpentry.
Mountain panel scraper. For smooth surfaces and facades of the mountain panel type.
| Weight | 3.75 kg |
|---|
Reviews
There are no reviews yet.