Hinge straight sprint complete

SKU: 3031-37

Hinge straight sprint complete

EUR5.39

Available in central stock
Quick facts

Additional information

Weight 0.02 kg
Material

hot-dip galvanized iron
Screw included

no
Height

50 mm
Width

37 mm

Hinges with the same function as hinges with angled pins, but made of thinner material and with slightly narrower dimensions. Can also be used in combination with angled pins.

Hot-dip galvanized iron. Thickness 1mm. Diameter pin 2,5mm. Width unfolded 37mm.

Screw not included. Suitable screw no 19 or TFS 6×3/4″

Description

Hinges with the same function as hinges with angled pins, but made of thinner material and with slightly narrower dimensions. Can also be used in combination with angled pins.

Hot-dip galvanized iron. Thickness 1mm. Diameter pin 2,5mm. Width unfolded 37mm.

Screw not included. Suitable screw no 19 or TFS 6×3/4″

Additional information

Weight 0.02 kg
Material

hot-dip galvanized iron
Screw included

no
Height

50 mm
Width

37 mm

Reviews

There are no reviews yet.

Be the first to review “Hinge straight sprint complete”

Your email address will not be published. Required fields are marked *


The reCAPTCHA verification period has expired. Please reload the page.

You may also need to

Hinge with loose v-groove complete

EUR2.92

Add to cart

Screw 19 zinc plated TFS 3,5×19 mm 10 pack

EUR3.20

Add to cart

Hinge with cone 74x70x2 right

EUR13.25

Add to cart

Hinge 98x84x2,5 right with cone

EUR16.36

Add to cart

Related products

Raising plate Weatherstripping fn 5mm

An elevation plate or spacer plate is often needed when installing a weatherization fitting on inward opening windows. The thickness of the sash and the distance to the window frame can vary and an elevation plate helps to mount in a neat way. Usually there is a difference of about 5-20 mm and then you need to buy corresponding elevation plates to ensure a good installation.

Elevation washers may also be needed when installing weatherization fittings for outward opening windows. For example, when you have stucco or profiles in the window sash or window sill that do not allow you to mount the weatherization fitting where you want.

EUR4.11

Brass window lock

Window lock with hook for outward opening windows. Untreated brass. Screw included.

The eyelet hook is the intelligent window fitting from around 1920 onwards. The eyelet hook is mounted on the sash of a single or coupled window, and has an adjustable screw that allows you to always get the window tight, even if the sash is slightly skewed or the seal uneven. Very suitable for use in combination with Gysinge’s wool sealing strips.

EUR7.22

Winged knob

Wing-shaped knob in sand-cast brass of the type that was common as closing fittings on recessed interior windows in the 19th century. Also called vervel.

The window can be opened when the knob is in the vertical position, or locked when the knob is horizontal. Can also be used to close cabinet doors and the like. Gysinge’s own model.

Including matching screw.

EUR10.51

Window handle with hook 5176 nickel-plated

Model Låsbolaget No. 676

Period 1910-1970

Screw not included.

Matching screw for window latch screw 13 to counter plate screw 9

EUR14.17

Turnstile fittings Inward opening

Weatherstripping for inward opening windows in a solid classic model. Stepwise opening and childproof. Available in nickel-plated and untreated brass. Screw for mounting included.

Fasten the part with the holder to the window frame. The other part is screwed to the bottom of the window frame. The gap between them is up to 10 centimeters opening, which also makes the fitting classified as childproof.

The fitting is tested and approved according to EN16281:2012, SS3587 and K7NT CONS 018.

ATTENTION! Sometimes so-called elevation plates/spacers are needed to get the right distance. Contact us and we will help you.

EUR56.67 – EUR61.70

Nickel-plated spring ring fittings, outward opening

Weatherstripping for outward opening windows in a solid classical model. Stepped opening and childproof. Nickel-plated. Screw TKFS N 3.5X16 mm for installation included. Template and simple installation instructions included.

The fitting is tested and approved childproof. Also available in untreated brass.

Tips! Sometimes one or more spacers are needed to get the right distance. See related products or ask in our shop.

EUR62.97

Related articles

There are no related articles for this product.

Please leave a comment what you think about our new webshop