Sharpen the blades of your paint scrapers and keep them sharp for more effective paint scraping.
This sharpening kit, specially designed for sharpening scraper blades for speedheater window scrapers, includes 2-pack ceramic abrasive cloths and a simple blade holder for easier sharpening.
EUR13.25
For scraping fine joinery, e.g. window frames, mirrored doors, moldings and furniture.
Scraper blade in special steel. Designed to reduce power requirements and not damage the wood. The blades are sharpenable and the back of the blade is sharpened so as not to lose the unique profiles.Ergonomically designed handle.
Intended for use when scraping heated paint on wood using the Speedheater methodTM.
From the Speedheater System.
EUR34.28
Jellyfish sting or cramp. Counter fittings for leaf bolt.
EUR2.56
Window lock with hook for outward opening windows. Untreated brass. Screw included.
The eyelet hook is the intelligent window fitting from around 1920 onwards. The eyelet hook is mounted on the sash of a single or coupled window, and has an adjustable screw that allows you to always get the window tight, even if the sash is slightly skewed or the seal uneven. Very suitable for use in combination with Gysinge’s wool sealing strips.
EUR7.22
Practical scraper for cleaning window glass when painting etc. Easy to change the blade. Holder for nickel-plated steel blade.
Steel sheet. One sheet included, spare sheets available separately.
EUR9.60
Bladen passar till Clickskrapan. Används för att skära loss färg, fog, spackel, kitt och andra beläggningar. Utmärkt för att rengöra fönster, stenskivor, spishällar, glas, metall, kakel och andra hårda objekt. Vid användning på mjuka underlag som målade ytor och trägolv måste man vara försiktig för att inte skada underlaget. Ryggblad har mått 20×39 mm och har en vass egg som är dubbelslipad. Tillverkad av kolstål för optimal hållbarhet. Används med Clickskrapa.
EUR3.56
Hand-forged window fittings after a common model from 1800 to 1850. Well made hand forging from Gysinge. Untreated iron.
Height 11.5cm, length 10.5cm, width 2.8cm. Nailed with hand-forged nail 1-1.5 inches.
EUR21.02
Hand-forged window fittings of models that were common throughout the country in the 18th century.
Well made hand forged window corner iron from Gysinge. Untreated. Nailed with hand-forged nails 1-1.5 inches. Width 26 mm, height 105 mm, length 105 mm, thickness about 2 mm.
EUR21.94
Corner iron 1850 – 1900.
Window fittings after a dominant model from the period 1850-1900. High quality. Hinge bars, hinges and corner brackets are available in two sizes, one for thicker arches and one for thinner ones.
EUR7.77
EUR6.86
Coupling hook for older windows. A traditional variant that works well for connecting windows.
A hole for fixing, then you let the hook step over the screw head of the corresponding sash and lock it that way.
EUR2.29
Door and window linings: Hand-planed linings adapted for rooms from the 18th to the 19th century.
A complete series of hand-planed carpentry for a room from the 18th century to the first half of the 19th century.
The price is per meter.
BUY ON SITE in our store in Gysinge. Samples can be seen in our store in Stockholm.
EUR22.85
Planed joinery based on models from the late 1800s and early 1900s. Planed after the model from our exhibition house “Andra bygget” from 1894 in Gysinge.
Because of their simple and rustic character, they are also useful in other contexts. The floor plinth, for example, has a shape that was already common in the 18th century. A complete room interior includes: Floor plinth, door and window linings, lining plinth, cornice and cornice.
The price is per meter. BUY ON SITE in our store in Gysinge. Samples are available to see in our store in Stockholm.
Door and window lining, late 19th century.
Included in our program of planed joinery from the second half of the 19th century is a machine-planed variety that was common throughout the country. The model is usually called “French joinery” and was in production until well into the 20th century. There were normally two variants, one more lavish for finer rooms, such as the hall, atrium and salon. These rooms included, for example, three-part cornices and three-part high plinths. For simpler rooms, such as kitchens, bedrooms and chambers, carpentry was used with smaller dimensions and less complicated profiles. However, some of the moldings, such as linings and breast moldings, tend to be the same, regardless of whether they are in finer or simpler rooms.
EUR10.05
Spare blade for scraping fine joinery, e.g. window frames, mirrored doors, moldings and furniture.
Scraper blade in special steel. Designed to reduce power requirements and not damage the wood. The blades are sharpenable and the back of the blade is ground so as not to lose the unique profiles.
Spare blade for scraping smooth surfaces such as facades etc.
Spare blade for scraping e.g. profiled facades and rough carpentry.
The eye bolt is the intelligent window fitting from around 1920 onwards. The eyelet hook is mounted on the sash of a single or coupled window, and has an adjustable screw in a plate that allows you to always get the window tight, even if the sash is slightly skewed or the seal uneven. Very suitable for use in combination with Gysinge’s wool sealing strips.
EUR9.96
Speedheaters Flexi Scraper – 6 profiles in 1 a multi-tool! With a light pressure, the scraper blade is angled and makes all sides scrapeable without having to change the blade. Innovative and flexible paint scraper that comes with a unique one-handed grip housing, blade magazine and three different scraper blades with a total of six possible scraping profiles. The ultimate tool for paint scraping, simply put!
EUR51.64
An interior window fitting of the trapdoor type, made of hand-polished brass. A common design throughout the first half of the 20th century. Very high quality. Also called window latch.
The fitting is polished, not lacquered, which means that the brass surface darkens naturally if it is not polished.
Untreated brass. Length 52mm, height 38mm. Suitable screw no 7. (Screw not included.)
EUR16.00
Interior window fittings of the trapdoor type in hand-polished brass. The model, also known as window latch, is common from the mid-19th century to a few decades into the 20th century.
The unusual feature of our fitting is a completely smooth back, which means that installing the fitting does not require drilling and making holes in the sash. Therefore, the fitting is very easy to install. At the same time, the sash is horizontal in the closed position. On many of the old models, the boom is usually only almost horizontal.
Note also that the edges are beveled, as on the original fittings (there are other simpler “copies” on the market). The fitting is polished, but not lacquered, which means that the brass surface darkens naturally if you do not polish it.
Polished brass. Height 37 mm, length assembled 60 mm.
Suitable screw no. 6. (Not included)
EUR18.19
Hinged bar. Hand-forged window fittings after a common model from 1800 to 1850. Well made hand forging.
EUR28.79
Oil for our glass cutter
