Hinges with the same function as hinges with angled pins, but made of thinner material and with slightly narrower dimensions. Can also be used in combination with angled pins.
Hot-dip galvanized iron. Thickness 1mm. Diameter pin 2,5mm. Width unfolded 37mm.
Screw not included. Suitable screw no 19 or TFS 6×3/4″
EUR5.29
Solid chair hinge with ball, left. Suitable for cabinet and wardrobe doors.
Model from around 1880-1920s. Ball-shaped spigots typical of the period. Available in both left and right versions. High quality.
Height excluding knobs 70 mm, width unfolded 74 mm, thickness 2 mm. Untreated iron.
Model: Left
Suitable screw: Screw 13
TIP! Here’s how to find out if you need right- or left-hinged hinges – Close and check! A closed door with hinges visible on the right is right-hinged. Similarly, a closed door with hinges visible on the left is left-hung.
EUR15.14
Solid chair hinge, right to windows and wardrobe doors.
Model from around 1860 to the middle of the 20th century. Ball-shaped spigots typical of the period. Available in both left and right versions. High quality.
Untreated iron. Screw not included. Thickness 2mm, height excluding studs 74 mm, width unfolded 70 mm.
Model: Right
Solid chair hinge with cone, left. Suitable for cabinet and wardrobe doors.
Model from the period around 1880-1920s. Typical cone-shaped spigots. Available in both left and right versions. High quality.
Height excluding knobs 74 mm, width unfolded 70 mm, thickness 2 mm. Untreated iron.
EUR12.99
Model from around 1860 to the middle of the 20th century. Typical cone-shaped spigots. Available in both left and right versions. High quality.
Untreated iron. Screw not included. Thickness 2 mm, height excluding studs 74 mm, width unfolded 70 mm.
Leaf hinge with a loose angled pin, especially suitable for hanging interior windows that cannot be lifted off.
Dimensions and design similar to the most common interior window hinges at the turn of the century. Facilitates the work with old interior windows, as you can easily hang the arches, instead of screwing them.
Excellent to use in combination with our leaf bars and our folding boom fittings.
The angle clamp has a comfortable lifting angle and is easy to release if you want to remove the sashes.
Hot-dip galvanized iron. Thickness 1.5 mm, height 50 mm, width unfolded 50 mm, diameter pin 2.5 mm. Screw not included. (Suitable screw no 19 or TFS 5×3/4″)
EUR2.87
Hinges with punched bumps, right. Hand-forged window fittings of models that were common throughout the country in the 18th century. Well made hand forging.
EUR39.87
Spiral-twisted hinge stack. Hand-forged window fittings of models that were common throughout the country in the 18th century. Well made hand forging. Untreated iron.
EUR28.22
Hinged bar. Window fittings after a dominant model from the period 1850-1900. High quality. Hinge bars, hinges and corner brackets are available in two sizes, one for thicker arches and one for thinner ones.
EUR10.66
EUR8.87
Pile of hinges. Hand-forged window fittings of models that were common throughout the country in the 18th century. Well made hand forging.
EUR29.12
Hinge, left. Window fittings after a dominant model from the period 1850-1900. High quality. Hinge bars, hinges and corner brackets are available in two sizes, one for thicker arches and one for thinner ones.
To hang a sash that is on the left of a window, you need a left hinge and a right hinge that you turn around and 2 hinge bars.
EUR14.78
Hinge bar with punched bolts, left. Hand-forged window fittings of models that were common throughout the country in the 18th century. Well made hand forging.
Hand-forged window fittings of models that were common throughout the country in the 18th century. Well made hand forging from Gysinge. Untreated iron.
Height approximately 20 mm, diameter pin 6mm, length cairka 60mm.
EUR8.78
Model: Lock Company No. 1310
Period after 1880
Used for all espagnolettes and window knobs 5050
EUR10.30
Model Låsbolaget N:o 1310
EUR10.75
Brass window screw for fixing window sashes. Two parts, a screw that is screwed through the sash and a counter plate that is attached to the window center post. Model of 1800-1900s type.
EUR4.66
Nickel-plated brass window screws usually replaced plain brass ones around the turn of the century 1900. Normally, all the windows in the house were screwed shut, except for the occasional sash, which was made openable thanks to a pair of hinges with a loose angle print. The fitting consists of two parts, a coarse screw that is screwed through the sash and a counterplate that is attached to the window center post..
EUR4.93
Model: E A Næsman & Co No. 7
Period: 1880-1920
Screw not included.
Suitable screw number 6 or number 7
EUR12.10
EUR13.44
Model: E A Næsman & Co No. 12
Sold in pairs
Matching screw number 8
EUR23.74
EUR25.98
