Hand-forged key plate for 18th century chamber locks and other locks with a similar key size. The pointed oval shape of the plate is typical of the 18th century, but the model remains even a few decades into the 19th century.

The key plate has four drilled holes for nails and a suitable model of hand-forged nail is our one-inch nail.

The facts

Hand forged iron. Untreated. Height approx. 85 mm, width 45 mm, thickness 2 mm.

Nailed with hand-forged nails 1 inch.

Angle strike plate for 18th century type chamber locks. Available in several designs that fit our different variants of 18th century chamber locks.

Solid chamber lock, typical of the late 19th century until the 1940s. Well made work with fine details in brass. Equipped with a locking knob to be locked from the inside. Available in both left and right models. Brass push button. Cast key included. Untreated iron, brass

Interior door lock intended for room doors after the middle of the 19th century, when there was a transition from surface-mounted chamber locks to recessed so-called mortise locks. The lock is a 3-keeper lock with 44 different key combinations and can be locked from both the outside and the inside. The lock has recess dimensions according to older standards. Therefore, it is often suitable from the late 1800s onwards. This lock is suitable for our prints and knobs, as well as accessories in the form of key plates, rosettes, long plates, etc.

Lock body and lock plate in galvanized steel. Supplied with two keys and strike plate. The latch bolt is reversible when dismantled, i.e. a right-hand lock can be turned into a left-hand lock and vice versa. Counter plate included. Equal locking with the same key for several locks can be specially ordered. Thorn depth 4.5cm.

Please note that the dimensional sketch is mirrored in relation to the product image.