Porcelain LED dimmer

SKU: 3041-33-22

Porcelain LED dimmer

EUR134.36

Available in central stock
Quick facts

Additional information

Dimmer switch with step switch function made of white porcelain for wall mounting. Press for on/off and turn to adjust brightness. This dimmer works with dimmable LED lamps and regular incandescent and low energy lamps. Also works with HV-Halogen and NV-Halogen with magnetic transformer. It does not work for NV-Halogen with electronic transformer.

Material: Insert, dimmer switch and scope are white porcelain

Size: Diameter 82 mm

Connected power: 7-110 W/VA and 3-35 W LED

Operating voltage: 230 V/50 Hz

Short circuit/overload protection: Yes, with fuse

Description

Dimmer switch with step switch function made of white porcelain for wall mounting. Press for on/off and turn to adjust brightness. This dimmer works with dimmable LED lamps and regular incandescent and low energy lamps. Also works with HV-Halogen and NV-Halogen with magnetic transformer. It does not work for NV-Halogen with electronic transformer.

Material: Insert, dimmer switch and scope are white porcelain

Size: Diameter 82 mm

Connected power: 7-110 W/VA and 3-35 W LED

Operating voltage: 230 V/50 Hz

Short circuit/overload protection: Yes, with fuse

Reviews

There are no reviews yet.

Be the first to review “Porcelain LED dimmer”

Your email address will not be published. Required fields are marked *


The reCAPTCHA verification period has expired. Please reload the page.

You may also need to

Related products

Frame round black porcelain

Round frame in black porcelain that fits Fontini recessed switches and sockets.

EUR26.05

Staircase switch white porcelain classic knob

Classic surface-mounted switch in white porcelain with white porcelain knob in a design that was common in Europe during the first half of the 20th century.

This switch has a so-called staircase function, which means that it can be used as a regular switch to turn a light source on and off. It can also be used in rooms, corridors or staircases to turn on a light source at one end of the room and off at the other end. If staircase switching is required, two switches with staircase function are needed. If a light source is also to be controlled from a third switch, this must have a cross function.

In the side of the base there is an opening for cable exit for surface-mounted electrical wiring, but it can also be mounted for recessed wall box in combination with any of Fontini’s base plates.

For surface mounting on wood paneling or other flammable material, an insulating plastic base plate can be used as additional fire protection.

EUR45.24

Stair switch black porcelain dark stain knob

Classic surface-mounted switch in black porcelain with dark stained wooden knob in a design that was common in Europe during the first half of the 20th century.

This switch has a so-called staircase function, which means that it can be used as a regular switch to turn a light source on and off. It can also be used in rooms, corridors or staircases to switch on a light source at one end of the room and off at the other end. If staircase switching is required, two switches with staircase function are needed. If a light source is also to be controlled from a third switch, this must have a cross function.

In the side of the base there is an opening for cable exit for surface-mounted electrical wiring, but it can also be mounted for recessed wall box in combination with any of Fontini’s base plates.

For surface mounting on wood paneling or other flammable material, an insulating plastic base plate should be used as additional fire protection.

EUR50.27

Stair switch black porcelain classic knob

Classic surface-mounted switch in black porcelain with black porcelain knob in a design that was common in Europe during the first half of the 20th century.

This switch has a so-called staircase function, which means that it can be used as a regular switch to turn a light source on and off. It can also be used in rooms, corridors or staircases to turn on a light source at one end of the room and off at the other end. If staircase switching is required, two switches with staircase function are needed. If a light source is also to be controlled from a third switch, this must have a cross function.

In the side of the base there is an opening for cable exit for surface-mounted electrical wiring, but it can also be mounted for recessed wall box in combination with any of Fontini’s base plates.

For surface mounting on wood paneling or other flammable material, an insulating plastic base plate should be used as additional fire protection.

EUR51.64

Staircase switch white porcelain natural color knob and base plate

Surface mounted switch in white porcelain with knob and base plate in untreated wood. Classic design that was common in Europe during the first half of the 20th century.

This switch has a so-called staircase function, which means that it can be used as a regular switch to turn a light source on and off. It can also be used in rooms, corridors or staircases to switch on a light source at one end of the room and off at the other end. If staircase switching is required, two switches with staircase function are needed. If a light source is also to be controlled from a third switch, this must have a cross function.

The surface-mounted switch in combination with the base plate is intended for mounting in a recessed wall box.

EUR62.61

Plejd Kron can dimmer 2x100VA

Krondimmer is a two-channel universal dimmer with output for two different loads for control with a spring-loaded push button or motion sensor. The product can be controlled automatically through built-in time functions such as astro and week clock, as well as wirelessly via the app or other Plejd products. DIM-02 has adjustable minimum, maximum and start level and can handle loads of up to 100 VA per channel.

EUR72.21

Related articles

There are no related articles for this product.

Please leave a comment what you think about our new webshop