Black surface-mounted junction box from Schneider. High model for Renova 1-compartment appliances. For switches, wall sockets and dimmers. For vertical or horizontal mounting.

Square junction box in white porcelain for surface mounting. Newly manufactured in a classic model.

4 break walls on opposite sides and 2 in corners.

ASSEMBLE AS FOLLOWS: Carefully tap out the break walls you intend to use. Screw the bottom of the box into place with the appropriate screws. Connect the cables. Screw on the cover with the appropriate screw.

Chronic dimmer LD200KRON from Vadsbo. Together with a resilient push button, the dimmer creates a dimmer function.

Crown dimmer means two dimmers in the same enclosure. The product is designed to be installed in A or B boxes. Installed in an appliance or in a junction box, for example behind the switch or in the ceiling cup.

LD200KRON is specially adapted for dimming low energy and LED lamps. The dimmer is equipped with two control inputs and you can thus mix different loads on the outputs. The product can handle a load of up to 100VA per channel and has an adjustable minimum dimming level.

For example, the dimmer can be controlled by a resilient switch. See for example: 31-330-17-2, 31-330-27-2, 3041-46-91