An elevation plate or spacer plate is often needed when installing a weatherization fitting on inward opening windows. The thickness of the sash and the distance to the window frame can vary and an elevation plate helps to mount in a neat way. Usually there is a difference of about 5-20 mm and then you need to buy corresponding elevation plates to ensure a good installation.

Elevation washers may also be needed when installing weatherization fittings for outward opening windows. For example, when you have stucco or profiles in the window sash or window sill that do not allow you to mount the weatherization fitting where you want.

An elevation plate or spacer plate is often needed when installing a weatherization fitting on inward opening windows. The thickness of the sash and the distance to the window frame can vary and an elevation plate helps to mount in a neat way. Usually there is a difference of about 5-20 mm and then you need to buy corresponding elevation plates to ensure a good installation.

Elevation washers may also be needed when installing weatherization fittings for outward opening windows. For example, when you have stucco or profiles in the window sash or window sill that do not allow you to mount the weatherization fitting where you want.

Brass window screw for fixing window sashes. Two parts, a screw that is screwed through the sash and a counter plate that is attached to the window center post. Model of 1800-1900s type.

Weatherstripping for outward opening windows in a solid classical model. Stepped opening and childproof. Nickel-plated. Screw TKFS N 3.5X16 mm for installation included. Template and simple installation instructions included.

The fitting is tested and approved childproof. Also available in untreated brass.

Tips! Sometimes one or more spacers are needed to get the right distance. See related products or ask in our shop.